HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Full Text Full Text (PDF) Interpretive Summary __Color Figures Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Franck, A. Articles by De Belie, N. Search for Related Content PubMed Articles by Franck, A. Articles by De Belie, N.

The Effect of Concrete Floor Roughness on Bovine Claws Using Finite Element Analysis

A. Franck^*, B. Verhegghe and N. De Belie^*,1

^* Magnel Laboratory for Concrete Research, Department of Structural Engineering, Faculty of Engineering, Ghent University, Gent, Belgium
Institute for Biomedical Technology, Department of Mechanical Construction and Production, Faculty of Engineering, Ghent University, Gent, Belgium

¹ Corresponding author: nele.debelie{at}ugent.be

The interaction between bovine claws and a concrete floor with defined roughness and friction coefficients is described using a finite element model. The model was built by using x-ray tomography scanner images of an unloaded fore and hind bovine claw. These images were used to reproduce the geometry of the claw horn capsule, which was used to create a finite element model. Young’s moduli of 382, 261, and 13.6 MPa were attributed to the dorsal wall horn, abaxial and axial wall horn, and bulb horn, respectively. Poisson’s ratio was set at 0.38. The horn was considered an isotropic elastic material. The model was completed by introducing a rigid support that simulated a concrete floor. The floor was moved to establish contact with the claw and was loaded with a force of 2 or 6 kN. The top border area of the horn capsule was fixed, but angular rotations were allowed. With this model, the effect of varying floor roughness and claw-floor friction on contact pressures and von Mises stresses in the claw horn could be evaluated. This was demonstrated by simulating the contact between the claw models and a smooth and rough floor with a center-line roughness value R_a of 0 or 0.175 mm, respectively, either without friction or with a static coefficient of friction of 0.75 and a dynamic coefficient of friction of 0.65. Contact pressures ranged from 2.14 to 27.55 MPa. The roughness of the floor was the main determinant in subsequent contact pressures. Maximum von Mises stresses were registered in the claw sole and were mostly between 5.04 and 16.44 MPa, but could be higher in specific situations. The variables claw (fore or hind) and floor (smooth or rough) had significant effects on the contact pressures; in addition, the floor resulted in significantly different von Mises stresses in the claw horn. The variable friction (frictionless or with friction) had a significant effect on the von Mises stresses. The load did not result in significantly different contact pressures and von Mises stresses because of the large increase in contact area with the exerted load.

Key Words: bovine claw • concrete floor • contact pressure • finite element modeling