HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Full Text Full Text (PDF) Interpretive Summary Color Figure 3 Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in PubMed Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Hinterhofer, C. Articles by Stanek, C. Search for Related Content PubMed PubMed Citation Articles by Hinterhofer, C. Articles by Stanek, C.

Slatted Floors and Solid Floors: Stress and Strain on the Bovine Hoof Capsule Analyzed in Finite Element Analysis

C. Hinterhofer^*,1, J. C. Ferguson^*, V. Apprich^*, H. Haider and C. Stanek^*

^* Clinic for Orthopaedics in Ungulates, University of Veterinary Medicine, Vienna, Austria
Department for Applied Plastic Technology, Austrian Research Institute for Chemistry and Technology, Vienna, Austria

¹ Corresponding author: chri{at}vet-hiho.at

An established finite element model of a bovine claw was used to compare mechanical stress levels in a loaded model claw on different types of flooring. The following situations were compared: a claw standing on a solid floor, a claw standing on the edge of a short tie stand, and claws standing on slatted floors with slats of 28 and 40 mm (wide) running parallel and perpendicular to the claw axis. Finite element analysis allowed visualization of stress peaks seen predominantly in the weight-bearing border of the dorsal abaxial wall and of the bulbar region and in the proximal axial wall. Maximum stress values of 13 MPa were found in the model claw loaded on the solid floor and values of 18 to 22 MPa were seen in the model claw loaded on the edge of the solid floor. On slatted floors, stresses increased in the situation in which the claw was not supported under the abaxial wall. Comparison between the other slatted floors showed little difference in amounts of mechanical stress. A clear distinction was detected between the solid floor with full claw contact and the slatted floors. From the point of view of the mechanical stress seen in finite element analysis, a large contact area between claw and floor, as seen in the solid surface floor, is preferable. When use of slatted floors is unavoidable, direction of the slats should run perpendicular to the direction of the walkway to prevent even more mechanical impact in certain footing situations.

Key Words: cattle • flooring • pressure • claw lesion

This article has been cited by other articles:

				Z. E. Barker, J. R. Amory, J. L. Wright, S. A. Mason, R. W. Blowey, and L. E. Green Risk factors for increased rates of sole ulcers, white line disease, and digital dermatitis in dairy cattle from twenty-seven farms in England and Wales J Dairy Sci, May 1, 2009; 92(5): 1971 - 1978. [Abstract] [Full Text] [PDF]

				C. Hinterhofer, H. Haider, V. Apprich, J. C. Ferguson, S. N. Collins, and C. Stanek Development of a twenty-one-component finite element distal hind limb model: Stress and strain in bovine digit structures as a result of loading on different floorings J Dairy Sci, March 1, 2009; 92(3): 972 - 979. [Abstract] [Full Text] [PDF]

				E. Telezhenko, C. Bergsten, M. Magnusson, M. Ventorp, and C. Nilsson Effect of Different Flooring Systems on Weight and Pressure Distribution on Claws of Dairy Cows J Dairy Sci, May 1, 2008; 91(5): 1874 - 1884. [Abstract] [Full Text] [PDF]

				A. Franck, B. Verhegghe, and N. De Belie The Effect of Concrete Floor Roughness on Bovine Claws Using Finite Element Analysis J Dairy Sci, January 1, 2008; 91(1): 182 - 192. [Abstract] [Full Text] [PDF]

				C. Hinterhofer, V. Apprich, E. Polsterer, H. Haider, and C. Stanek Comparison of Stress Zones in Finite Element Models of Deformed Bovine Claw Capsules J Dairy Sci, August 1, 2007; 90(8): 3690 - 3699. [Abstract] [Full Text] [PDF]